Hot Dip Galvanized Fasteners Specification

Most Trusted HDG Bolts and Nuts Manufacturer in India

Hot Dip Galvanized Fasteners Spotlight
Ready Stock: M2 to M80
Custom Sizes: Up to 4″
Length: 3 mm to 2000 mm long
International Standard: DIN 931, DIN 933, DIN 934, DIN 970, ANSI B 18.2.4 2M, ANSI B 28.2.4 1M, ASME B18.5, ASME B16.5
Raw Material Origin: SA, Europe, New Zealand, South Africa, Algeria, United Kingdom, Morocco, Australia India etc
MTC: EN 10204/3.1B
Suitable Environment: Salt Water and Mild Acids
Thread Pitch: Fine Thread and Coarse Thread
Finish: Phosphating, HDG, Oxidation
Threads: UNJ, UNC, UNF, Rolled, UNR
Temperature Range: -148°F to 192°F
To Know About Latest Price List of Hot Dip Galvanized Fasteners Please Contact Us

 

Hot Dipped Galvanized Nuts

Hot Dipped Galvanized Nuts

Galvanized Bolts

Galvanized Bolts

Hot Dipped Galvanized Screws

Hot Dipped Galvanized Screws

 

The protection of steel fasteners against corrosion has been around for a long time, but hot-dip galvanising (HDG) is one of the oldest and most often used methods. The Hot Dip Galvanised Fasteners coating requires very little maintenance and offers superior corrosion protection to steel buildings for a period of fifty to seventy years in the majority of atmospheric climates .

Hot Dip Galvanised Fasteners offer two distinct forms of protection against corrosion: barrier and galvanic (cathodic). It prevents corrosion of steel by functioning as a barrier that is only partially permeable to the environmental factors that are responsible for the corrosion. In addition, given that zinc is a more reactive metal than steel, the zinc galvanised coating will “sacrifice” or corrode first, therefore shielding the steel substrate from further damage. Due to the fact that the rate of corrosion of zinc is at least ten times slower than the rate of corrosion of steel, a thin covering of zinc may preserve steel for an extended period of time.

 

Table of Content

 

The process of hot-dip galvanising begins with the meticulous cleaning of the surface of the fastener and the removal of any organic pollutants such as dust, gasoline, or oil. Scale and corrosion may be removed by pickling the object in a mixture of diluted sulfuric acid that is warmed, or in a mixture of hydrochloric acid that is put at room temperature. After that, the fasteners are given another washing in clean water. After being meticulously cleaned, the components are then submerged in a flux tank, which normally contains an aqueous solution of zinc ammonium chloride. Before the steel can be galvanised, the oxides need to be removed using fluxing, which also prevents new oxides from developing on the surface of the steel. In addition, fluxing encourages the adhesion of the zinc to the surface of the steel.

Vision Alloys is Most Economical Hot Dip Galvanized Fasteners Manufacturer in India

 

HDG Bolts and Nuts Manufacturers in India

Hot Dip Galvanized Fasteners Specification

Find Hot Dip Galvanized Fasteners Manufacturer in India Offer Detail Specification

Bolts Size
HDG Bolts Size
  • M10-M160
Metric Size
Galvanized Anchor Bolts Coating Thickness
  • 43 to 86 microns

 

Length
Hot Dip Galvanized Nuts Size
  • M6 to M80
Thread Pitch
HDG Bolts And Nuts Thread Pitch
  • Fine
  • Coarse
Manufacturing Methods
Galvanized Nut Bolt Manufacturing Methods
  • Cold Forging
  • CNC Machined
  • Hot Forging
Form
Galvanized Stud Bolt Form
  • A
  • D
  • C
  • G
  • B
  • E

 

Finish
Hot Dip Galvanized Nuts Surface Finish
  • Plain, Electric galvanized
  • Phosphating, Zinc impregnation
  • Oxidation, DACROMET
Machines
HDG Eye Bolts Certificates
  • EN 10204 / 3.1
  • ISO 4032
  • ISO 4033
Testing
Hot Dip Galvanized Washer Testing
  • 100% Tested Hot Dip Galvanized Fasteners with MTC EN 10204 3.1/3.2

 

Thread Types
Galvanized Threaded Rod Thread Types
  • UNC
  • UN8
  • BSW
  • UTS
  • ACME
  • UNF
  • UNR
  • UNM
  • BSF

 

Fastener Types
Hot Dip Galvanized Fasteners Types
  • hex bolt
  • bolt
  • nuts
  • threaded rod
  • screws
  • washers
  • stud bolt

 

Value Added Services
Hot Dipped Bolts Value Added Services
  • Bagging
  • Head Shank Drilling
  • Thread Locking
  • Head Painting
Drive Style
HDG Bolts and Nuts Drive Types
  • Oval
  • Hexagon washer
  • Pan
  • Cross
  • Truss
  • Torx
  • Round
  • Hex

 

Head Types
Galvanized A325 Hex Bolt Head Types
  • Truss
  • Flat
  • Phillips Drive
  • Socket cap head
  • Button head
  • Slotted Drive
  • Combination Drive
  • Slotted hex washer
  • Hex washer head
  • Frearson Drive
  • Pan
  • Hex head
  • Oval
Thread Class
Hot Dip Galvanized Screws Class
  • 5 CSF
  • Class 2A (Medium fit)
  • 2G
  • custom
  • 5 ONF
  • 3G
  • 4G
  • 8G
  • Class 1A (Loose fit)
  • 6G
  • Class 3A (Tight fit)
  • 5 HF

 

 

Supplier of Galvanized Anchor Bolts in Variety of Sizes as Per ISO 10684 Standards

HDG Anchor Bolts Size Chart

View Hot dip galvanized bolts Supplier in India who Provides Various Sizes

HDG Anchor Bolts Dimension

Diameter D M6.5 M8 M6.5 M8 M8 M6.5 M10 M10
Length 55 80 75 60 100 100 100 75
Std Pack 100 50 100 50 50 100 50 50

 

Stockist of HDG Coated Screws in Phillips, Slotted and Six-Lobe Head Drive at Low Cost in Mumbai

Price List of A325 Galvanized Fasteners

To Know About Hot Dip Galvanized Fasteners Price Per Kg in India Please Contact Us Hot Dip Galvanized Fasteners Price List

 

Refer Hot Dipped Galvanized Hex Bolts Dimension Before Buying the Products
Galvanized Hex Bolt Dimensions

Find Hot Dip Galvanized Fasteners Supplier in India Who Provide Various Dimensions

Galvanized Hex Bolt Dimension

Nominal Size or Basic Product Diameter inch 5⁄16 3⁄8 7⁄16 1⁄4 1⁄2 3⁄4 7⁄8 5⁄8 1 1 3⁄8 1 1⁄8 1 1⁄2 1 1⁄4
mm 0.3125 0.375 0.4375 0.25 0.5 0.75 0.875 0.625 1 1.375 1.125 1.5 1.25
Full-Size Body Diameter, E Max 0.324 0.388 0.452 0.26 0.515 0.768 0.895 0.642 1.022 1.404 1.149 1.531 1.277
Min 0.298 0.36 0.421 0.237 0.482 0.729 0.852 0.605 0.976 1.345 1.098 1.47 1.223
Width Across Flats, F Basic inch 1⁄2 9⁄16 5⁄8 7⁄16 3⁄4 11⁄8 1 5⁄16 15⁄16 1 1⁄2 2 1⁄16 1 11⁄16 2 1⁄4 1 7⁄8
Max 0.5 0.562 0.625 0.438 0.75 1.125 1.312 0.938 1.5 2.062 1.688 2.25 1.875
Min 0.484 0.544 0.603 0.425 0.725 1.088 1.269 0.906 1.45 1.994 1.631 2.175 1.812
Width Across Corners, G Max 0.577 0.65 0.722 0.505 0.866 1.299 1.516 1.083 1.732 2.382 1.949 2.598 2.165
Min 0.552 0.62 0.687 0.484 0.826 1.24 1.447 1.033 1.653 2.273 1.859 2.48 2.066
Head Height, H Basic Basic inch 7⁄32 1⁄4 19⁄64 11⁄64 11⁄32 1⁄2 37⁄64 27⁄64 43⁄64 29⁄32 3⁄4 1 27⁄32
Max 0.235 0.268 0.316 0.188 0.364 0.524 0.604 0.444 0.7 0.94 0.78 1.036 0.876
Min 0.195 0.226 0.272 0.15 0.302 0.455 0.531 0.378 0.591 0.81 0.658 0.902 0.749
Radius of Fillet, R Max 0.03 0.03 0.03 0.03 0.03 0.06 0.06 0.06 0.09 0.09 0.09 0.09 0.09
Min 0.01 0.01 0.01 0.01 0.01 0.02 0.02 0.02 0.03 0.03 0.03 0.03 0.03
Nominal Thread Length for Bolt Lengths, LT 6 in. and Shoter 0.875 1 1.125 0.75 1.25 1.75 2 1.5 2.25 3 2.5 3.25 2.75
Over 6 in. 1.125 1.25 1.375 1 1.5 2 2.25 1.75 2.5 3.25 2.75 3.5 3
Nominal Size or Basic Product Diameter inch 1 3⁄4 1 7⁄8 2 1 5⁄8 2 1⁄4 2 3⁄4 3 2 1⁄2 3 1⁄4 3 3⁄4 3 1⁄2 4
mm 1.75 1.875 2 1.625 2.25 2.75 3 2.5 3.25 3.75 3.5 4
Full-Size Body Diameter, E Max 1.785 1.912 2.039 1.658 2.305 2.827 3.081 2.559 3.335 3.858 3.589 4.111
Min 1.716 1.839 1.964 1.591 2.214 2.711 2.961 2.461 3.21 3.726 3.461 3.975
Width Across Flats, F Basic inch 2 5⁄8 2 13⁄16 3 2 7⁄16 3 3⁄8 4 1⁄8 4 1⁄2 3 3⁄4 4 7⁄8 5 5⁄8 5 1⁄4 6
Max 2.625 2.812 3 2.438 3.375 4.125 4.5 3.75 4.875 5.625 5.25 6
Min 2.538 2.719 2.9 2.356 3.262 3.988 4.35 3.625 4.712 5.437 5.075 5.8
Width Across Corners, G Max 3.031 3.248 3.464 2.815 3.897 4.763 5.196 4.33 5.629 6.495 6.062 6.928
Min 2.893 3.099 3.306 2.616 3.719 4.546 4.959 4.133 5.372 6.198 5.786 6.612
Head Height, H Basic Basic inch 1 5⁄32 1 1⁄4 1 11⁄32 1 3⁄32 1 1⁄2 1 13⁄16 2 1 21⁄32 2 3⁄16 2 1⁄2 2 5⁄16 2 11⁄16
Max 1.196 1.276 1.388 1.116 1.548 1.869 2.06 1.708 2.251 2.572 2.38 2.764
Min 1.054 1.13 1.175 0.978 1.327 1.632 1.815 1.479 1.936 2.241 2.057 2.424
Radius of Fillet, R Max 0.12 0.12 0.12 0.09 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19
Min 0.04 0.04 0.04 0.03 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06
Nominal Thread Length for Bolt Lengths, LT 6 in. and Shoter 3.75 4 4.25 3.5 4.75 5.75 6.25 5.25 6.75 7.75 7.25 8.25
Over 6 in. 4 4.25 4.5 3.75 5 6 6.5 5.5 7 8 7.5 8.5

 

Hot Dip Galvanized Stud Bolts Dimension

Hot Dip Galvanized Stud Bolt Dimension

Nominal Size Diameter, D inch 01/4 038/ 5/16 7/16 9/16 01/2 058/ 078/ 03/4 1 1 3/8 1 1/8 1 1/4
Tap End Full Thread Length, BM Nominal 0.375 0.563 0.469 0.656 0.844 0.75 0.938 1.313 1.1.25 1.5 2.063 1.688 1.875
Min. 0.35 0.532 0.44 0.62 0.802 0.708 0.892 1.258 1.075 1.438 2 1.625 1.813
Max. 0.4 0.594 0.498 0.692 0.896 0.792 0.983 1.368 1.175 1.562 2.125 1.75 1.938
Umax = 2P UNC & NC-5 Thread 0.1 0.125 0.111 0.143 0.167 0.154 0.182 0.222 0.2 0.25 0.333 0.286 0.286
UNF Thread 0.071 0.083 0.083 0.1 0.111 0.1 0.111 0.143 0.125 0.167 0.167 0.167 0.167
8UN Thread … — — — — — — — — — 0.25 0.25 0.25
Minimum Nut End Full Thread Length, Bmin L ≤ 10 0.75 1 0.875 1.125 1.375 1.25 1.5 2 1.75 2.25 3 2.5 2.75
10 1 1.25 1.125 1.375 1.625 1.5 1.75 2.25 2 2.5 3.25 2.75 3
L > 16 1.5 1.75 1.625 1.875 2.125 2 2.25 2.75 2.5 3 3.75 3.25 3.5
Nominal Size Diameter, D inch 1 1/2 1 3/4 1 5/8 1 7/8 2 1/4 2 2 1/2 3 2 3/4 3 1/4 3 3/4 3 1/2 4
Tap End Full Thread Length, BM Nominal 2.25 2.625 2.438 2.813 3.375 3 3.75 4.5 4.125 4.875 5.625 5.25 6
Min. 2.188 2.563 2.375 2.75 3.3 2.925 3.675 4.425 4.05 4.775 5.525 5.15 5.9
Max. 2.313 2.688 2.5 2.875 3.45 3.075 3.825 4.575 4.2 4.975 5.725 5.35 6.1
Umax = 2P UNC & NC-5 Thread 0.333 0.4 — — 0.444 0.444 0.5 0.5 0.5 0.5 0.5 0.5 0.5
UNF Thread 0.167 — — — — — — — — — — — —
8UN Thread 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
Minimum Nut End Full Thread Length, Bmin L ≤ 10 3.25 3.75 3.5 4 4.75 4.25 5.25 — 5.75 — — — —
10 3.5 4 3.75 4.25 5 4.5 5.5 6.5 6 7 8 7.5 8.5
L > 16 4 4.5 4.25 4.75 5.5 5 6 7 6.5 7.5 8.5 8 9

 

HDG Washers Dimensions

HDG Washers Dimension

Nominal Size I.D. [Note (1)] 16 12 20 24 27 22 30 42
T Max. 18.4 14.4 22.5 26.5 30.5 24.5 33.6 45.6
O.D. Min. 18 14 22 26 30 24 33 45
Max. 34 27 42 50 56 44 60 84
Standard Min. 32.4 25.7 40.4 48.4 S4.1 42.4 58.1 81.8
Extra Thick Max. 4.6 4.6 4.6 4.6 4.6 4.6 4.6 7.2
Clipped Width E, Min. Min. 3.1 3.1 3.1 3.4 3.4 3.4 3.4 4.6
Max. 10 10 10 10 10 10 10 10
Min. 8 8 8 8 8 8 8 8
[Note (2)] 14 10.5 17.5 21 23.6 19.2 26.2 36.7
Nominal Size I.D. [Note (1)] 48 36 56 72 80 64 90 100
T Max. 52.7 39.6 62.7 78.7 86.9 70.7 96.9 107.9
O.D. Min. 52 39 62 78 86 70 96 107
Max. 95 72 107 130 142 118 159 176
Standard Min. 92.8 70.1 104.8 127.5 139.5 115.8 156.5 173.5
Extra Thick Max. 7.2 4.6 8.7 8.7 8.7 8.7 8.7 8.7
Clipped Width E, Min. Min. 4.6 3.4 6.1 6.1 6.1 6.1 6.1 6.1
Max. 10 10 10 10 10 10 10 10
Min. 8 8 8 8 8 8 8 8
[Note (2)] 42 31.S 49 63 70 56 78.7 87.5

 

Check Galvanized Carriage Bolts Tensile Strength and Application
Galvanized Screws Tensile Strength
120 ksi Diameter 1-1/8″ 1/2″ 1-1/4″ 7/8″ Above values based on
Tensile min lbf 91,600 17,050 1,16,300 55,450 120,000psi
Stress Area in ² 0.763 0.142 0.969 0.462
150 ksi Proof Load min lbf 70,250 13,050 89,200 42,500 92,000psi
Proof Load min lbf 64,900 12,050 82,400 39,250 85,000psi
Proof Load min 99,200 18,500 1,26,000 60,100 130,000psi
Tensile max lbf 1,32,000 24,600 1,67,650 79,950 173,000psi
Tensile min lbf 1,14,450 21,300 1,45,350 69,300 150,000psi
Proof Load min lbf 91,600 17,050 1,16,300 55,450 120,000psi
120 ksi – A325 (Hex) & F1852 (Twist-Off) Diameter 5/8″ 3/4″ 1″ 1-1/2″ 1-3/8″
Tensile min lbf 27,100 40,100 72,700 1,68,600 1,38,600
Stress Area in ² 0.226 0.334 0.606 1.105 1.155
150 ksi – A490 (Hex) & F2280 (Twist-Off) Proof Load min lbf 20,800 30,700 55,700 1,29,300 1,06,300
Proof Load min lbf 19,200 28,400 51,500 1,19,500 98,200
Proof Load min 29,400 43,400 78,800 1,82,600 1,50,200
Tensile max lbf 39,100 57,800 1,04,850 2,43,100 1,99,850
Tensile min lbf 33,900 50,100 90,900 2,10,750 1,73,250
Proof Load min lbf 27,100 40,100 72,700 1,68,600 1,38,600

 

Applications Of Galvanized Carriage Bolts

Find Hot dip galvanized bolts Manufacturer in India Provides High Quality Products To Various Industries

  • Oil & Gas
  • Chemical Process
  • Heavy Machinery & Industrial Projects
  • Power & Energy
  • Marine & Coastal Environments

 

Types of HDG Fasteners

Galvanized Anchor Bolts

Galvanized Anchor Bolts

HDG Washers

HDG Washers

Hot Dipped Galvanized Carriage Bolts

Hot Dipped Galvanized Carriage Bolts

Galvanized Heavy Hex Nuts

Galvanized Heavy Hex Nuts

HDG Threaded Rod

HDG Threaded Rod

 

Galvanized Flat Washers Torque Chart
Galvanized Bolt Size NSm LbfSft
3/8 – 16 25.9 19.1
5/16 – 18 14.5 10.7
1/2 – 13 63.7 47
7/16 – 14 42.0 31
1/4 – 20 7.19 5.3
5/8 – 11 114 84
9/16 – 12 86.8 64
7/8 – 9 301 222
3/4 – 10 183 135

 

Performance of Zinc Layer Galvanized Heavy Hex Nuts
Harsh Environments Ordinary Environment
200μm 35μm

 

Galvanized Heavy Hex Nuts Tolerance Chart
Hot Dip Galvanized Bolt Lengths Thru 6″ Bolt Lengths Over 6″ Bolt Diameter
-0.19 -0.25 7/8″
-0.12 -0.19 1/2″
-0.19 -0.25 3/4″
-0.12 -0.25 5/8″
-0.25 -0.25 1-3/8″
-0.25 -0.25 1-1/8″
-0.25 -0.25 1-1/2″
-0.25 -0.25 1-1/4″
-0.19 -0.25 1″

 

Get Hot Dip Galvanized Fasteners Material Delivery With Mtc 3.1 Report in Following Countries
Turkey UAE Australia Saudi Arabia Qatar
Brazil Italy Germany Ireland Denmark
South Africa Canada USA UK Spain
Singapore Nigeria Poland Netherlands Mexico

 

Coated Fasteners

Other Products

  •  Vision Alloys is A Manufacturer of Steel Fasteners Company in India
  •  Dealers and Distributors of Bolting Products in USA, Europe, New Zealand, Algeria, United Kingdom, Morocco, South Africa and Australia, Egypt, Peru, chile, Jordan, Argentina
  •  Manufacturer and Supplier of Stainless Steel, Nickel Alloy, Titanium, Copper Materials in Mumbai.
  •  Stockist and Trader of Top Quality High Temperature Alloys for Oil and Gas Industry and Standard & Custom Sizes in EX Stock
Sign up today to receive our latest news, special offers and much more.
Call us and get it done
When you hire us for construction services, you know you're getting highly qualified professionals who have the expertise and experience to make sure your project is done properly
and functions.
Get A Quote
Send Your Enquiry
Get a quote in minutes
Or reach us directly:
+91 97694 34949  |  sales@stainlesssteelfasteners.net
Copied to clipboard